The Dripless SI300 Contractor Grade Heavy Duty caulking gun has a steel revolving frame that fits 10 oz. cartridges and has a 16:1 thrust ratio for use with high viscosity materials such as silicone, latex, drywall, sub-floor adhesives, and polyurethanes. The gun has both drip and non-drip settings. On the non-drip setting, the rod retracts after each pull of the trigger, removing pressure from the tube to help prevent dripping. The hook on the back allows it to hang on a ladder, and a seal puncture tool and a spout cutter are built into the side of the gun for opening cartridges without a knife. Caulking guns, also called caulk or cartridge guns, dispense a controlled flow of products such as caulk, sealants, and adhesives from a tube or cartridge. A manual caulking gun consists of a frame which holds the tube, a trigger, and a rod which moves forward when the trigger is depressed, dispensing the product. Manual caulking guns have a thrust ratio; the higher the thrust ratio, the easier it is to dispense the caulk, sealant, or adhesive. Air-powered or pneumatic caulking guns also have a frame and a trigger, but are used with an air pressure regulator that pushes the product from the tube using air pressure instead of a rod. Dripless, Inc. manufactures caulking guns and caulking and painting accessories. The company, founded in 1992, is headquartered in Santa Rosa, CA.
Steel revolving frame caulking gun for 10 oz. cartridges
Thrust ratio of 16:1 for use with high viscosity materials
Has drip and non-drip settings; on non-drip setting rod retracts after each pull of the trigger to help prevent dripping
Revolving frame allows cartridge to rotate for maintaining bead orientation when caulking around corners